Best L-bracket for your camera in 2024 (2024)

Looking for the best L-bracket for your DSLR or mirrorless camera? This guide will tell you what to look out for, help you pick the best one, and find you the best prices.

We all know the value of usingatripod for shooting landscapes. Not only does it keep your camera rock-steady through the duration of anexposure, it’s also a vital composition aid.It enables you to carefully compose yourscene, then wait for the opportune moment just beforefiring the shutter.

Jobbing pros also know that to maximize the sales potential of their shots, they have toshoot in both landscape and portrait orientations, sothat their images are suitable for magazine or brochure spreads and covers.

However, tripods are primarily designed forshooting horizontally. While most tripod heads can be tilted by 90 degrees to flip the camera into a vertical orientation, this shifts the position of the camera to the side of – and often below – the original shooting position, so your carefully considered composition needs to be redone from scratch.

It also shifts the centre of gravity from directly above the tripod legs, potentially destabilising the entire setup.

An L-bracket is a camera plate that wraps around the camera in an L-shape, with the tripod mount running underneath and to the side of the camera. To change the shooting orientation from horizontal to vertical, you pop the camera off the tripod and remount itusing the socket on its side.

On the face of it, an L-bracket is simply aright-angled piece of metal – but, as ever, there’s a little more to it than that. Let’s checkout the L-bracket options…

The best L-bracket for your camera

3 Legged Thing’s Lexie is an Arca-Swiss compatible L-bracket, with a modular construction that makes it suitable for use on many cameras - and more than its predessor the Ellie. It’s available in Copper, Metallic Slate Grey or Darkness (matte black), and is made from anodised aerospace-grade magnesium alloy, with a 1/4-inch-20 stainless steel Stagsden screw to mount it on a camera. There are also four 1/4-inch-20 threads (two in the upright plate and two in the base plate) for attaching accessories such as a light, accessory arm or monitor.

3 Legged Thing supplies the two plates of the Lexie unconnected, so the first step in using it is to slot them together and tighten the bolts before adjusting the length of the horizontal plate (if necessary) to fit your camera. This means using the tiny hex key supplied in the box, which is a little fiddly.

With this done, it should be possible to mount the camera on an Arca-Swiss-type tripod head, in either portrait or landscape orientation, without shifting the focal plane and while keeping the centre point of the camera directly above the tripod for maximumstability.

Understandably, being a Universal L-Bracket, theLexie may not fit as snugly as a bracket that’s designed for a specific camera, but it costs much less and has the big bonus of being transferable.

See our full 3 Legged Thing Lexie review

By far the most substantial bracket here, Manfrotto’s RC4 is a one-piece design and is constructed from magnesium. While the other brackets come with an Arca Swiss fitting, the RC4 is compatible with Manfrotto’s 410PL quick-release plate; Arca Swiss plates slide along the length into a tripod mount, while this clicks into a fixed position on the tripod head. Further variations are the Q2, fitted with 200PL-14 plates, and the Q5, which uses 501PL plates.

The RC4 comes with a Y-shaped ruler to measure the distance between the lens barrel andplate; the idea is you set the same distance between the lens and both the base and side plates, so the centre of the lens is perfectly lined up in both portrait and landscape orientation. Other features include a level bubble, anda pullout peg to prevent the camera rotating.

The RC4 dwarfs our test Z7 to the point of being difficult touse the controls, and even felt like overkill on the D850. This bracket is really designed for the more square shape of bigger pro-grade cameras, such as the Nikon D6, or whena battery grip is fitted to the camera.

Kirk is one of the oldest names in the L-bracket game - and is still a great choice for the serious photographer. American made, Kirk brackets are custom made to fit a wide range of mirrorless and DSLR cameras, old and new - and they even make models that are suitable for use with optional vertical grips. When shopping for a Kirk, you need to make sure that you have picked the right one for your camera - as there are lots of options available.

Originally launched alongside the Nikon Z6 and Z7, the Zelda is a custom-fit bracket designed solely for Nikon’s full-frame mirrorless range. With their form factors being virtually identical, it also fits the more recent Nikon Z 5, as well as the Z 6II and the Z 7II. Thesmaller Z 50 has its own variant, the 3-Legged Thing Zayla.

Unlike the other aluminum brackets, this is crafted from a single piece of metal; with
no joins, there shouldn’t be any danger of the right angle sagging over time.

The camera connection screw doesn’t slide along the frame but is fixed in place; a notch next to it slips into a recess on the underside of Z-system full-frame bodies, ensuringthat the camera is perfectly lined up.

The open side plate is designed to fit the ports of the Z cameras precisely, and there’s also a screw hole for attaching accessories. It fits the Zcameras so well that it’s the obvious choice if youown one of these mirrorless machines.

The downside, of course, is that it won’t fit any other non-full-frame Z mirrorless cameras you might have – now or in the future.

See our full 3Legged Thing Zelda review

The Alfie is custom-made to fit a range of Sony full-frame mirrorless camera. Compatible models include the A7 III, A7 IV, A7R III, A7R IV, A7S III, A9 II, and A1. The bracket is designed so that the battery door can be opened when installed - and also allows for the flip-out screen to be angled and rotated. A neat addition is that there is supplied attachment that makes it easier for you to use the bracket whilst tethering the camera to a computer.

This is a dedicated bracket for use on the Canon EOS R5, R6, R6 Mark II, and R5 C. As with other 3 Legged Thing custom models, the design allows you access to the side ports, the battery compartment, and the rotating screen. Once again, you get a choice of three different colors.

L-bracket: things to look out for

1. A universal bracket offers flexibility to upgrade your camera, but a custom-fit bracket ensures a perfect fit.

2. Most L-brackets are Arca Swiss-compatible: if your tripod head doesn’t have this mount, it won’t fit.

3. Designs that enable youto access the battery door are handy should you run out ofjuice mid-shoot.

4. Some brackets obscure the connection ports, which may be a problemif you like toshoottethered. It may be preferable to use a wireless remote, rather than a cable release.

5. An L-bracket often obstructs the battery compartment of the camera – insert fully charged batteries before you attach the bracket to save you time disassembling the setup during your shoot.

6. Take advantage of your bracket and don’t move the head once it’s level (excluding pivot functions). Adjust the legs if you need to re-level your camera.

7. Rubber strips on the base plate prevent scratches and scrapes on the underside ofyourcamera.

8. Larger lenses often come packaged with a rotatable lens collar, fitted with a tripod screwthread. This is a better option to an L-bracket for these front-heavy setups as it reduces strain on the lens mount.

• The best travel tripod
• The best video tripods
• The best monopods
• 7 golden rules of tripod stability
• Best ball heads for tripods
• Best pan and tilt heads for tripods
• Best gimbal heads for tripods
• 50 best camera accessories

Related articles

• Black and white photography helped save my Nikon D800 from the scrap heap!
• Voigtlander launches pair of retro 50mm lenses for Leica M-mount
• Kilts, cabers and cultural significance: Robbie Lawrence captures the Highland Games as you've never seen it
• Global BirdFair 2024 –checking out the gear at Lyndon Top