Home » Problems » NoCable OTA Antenna TV Guide not loading: Issues with NoCable OTA Antenna TV Guide
NoCable OTA Antenna TV Guide does not load or only very slowly despite internet connection? Then find out here what you can do if NoCable OTA Antenna TV Guide cannot be loaded.
It can be quite annoying when an app from the App Store cannot be loaded and thus updated. The download or update is started, but only a fraction of the app is loaded after hours.
Or an app like NoCable OTA Antenna TV Guide cannot be installed because the download does not start even though you are connected to the internet.
By the way, other problems and errors can occur which you can find in the overview of all NoCable OTA Antenna TV Guideproblems find.
NoCable OTA Antenna TV Guide not loading
You want to download or update NoCable OTA Antenna TV Guide and it takes forever for the download to start or for the app to be completely downloaded because it just won’t load. Many then desperately try to restart the download of NoCable OTA Antenna TV Guide, but this does not lead to any useful result either.
The next attempt by many will be to check the internet connection. But the WLAN shows full reception and it still doesn’t work or works very slowly.
NoCable OTA Antenna TV Guide loads very slowly
If NoCable OTA Antenna TV Guide is downloading very slowly, it could also be due to the size of the app itself. The progress bar gives you a slow download, but this may only appear because of the size of the app. In the event of an update, you can check in the respective app store how big the installation file is and see whether it may load for so long due to its size.
NoCable OTA Antenna TV Guide Update does not start
Whether you want to update NoCable OTA Antenna TV Guide or download it again. If one doesn’t work, you probably have the same problems with the other thing and should look for the same solutions.
We have therefore put together a few possible solutions so that you can download the NoCable OTA Antenna TV Guide app without any problems.
In order for the NoCable OTA Antenna TV Guide download to work:
We hope that the following solutions help so that you can load NoCable OTA Antenna TV Guide and the download doesn’t take forever. If you know of other possible solutions, we look forward to receiving a message from you at the end of this article.
- Check internet connection
The reasons why NoCable OTA Antenna TV Guide cannot be loaded cannot be more different. In most cases it is due to your own internet connection. It is quite possible that your device is in a WiFi network, but it still does not work, so you should try to access a website on the Internet using your browser. If this works fine, then it’s not your smartphone or tablet. If you try to download the app via the mobile network (which is not recommended because of the data consumption), then you should check how stable the mobile connection is. Perhaps your data volume has also been used up and is therefore only available slowly.It can also happen that a download from the mobile network is not possible due to your settings.
In this case you should check the settings for mobile data on your device. - Restart smartphone or tablet
Often there are problems with the App Store after updating the Android or iOS operating system. After the system has been updated, it may well happen that the connection with the login data for the respective store no longer works securely. In this case you should restart your smartphone or tablet, which will reload all settings and functions and, if necessary, re-establish connections to the App Store. - Check server status
If a restart and a working internet connection did not solve the problem and NoCable OTA Antenna TV Guide still loads slowly or not at all, then it could also be on the servers of the iTunes Store for iOS or for Android on the servers of the Google Play Store lie. It shouldn’t be due to the servers of the developer New Imagitas Inc, as the app is on the App Store servers, in rare cases these can be overloaded or malfunctions occur due to maintenance work.check Apple server status
check Google server status
- For Android: Empty the cache and delete the data in the Play Store
This will restart the app completely and problems may be resolved.- Open the “ Settings ” app on the device.
- Tap Apps & Notifications then click View all apps .
- Scroll down and tap Google Play Store.
- Tap Memory Empty cache .
- Then tap on Clear data .
- Open the Play Store again and try the download again.
So, we hope the tips and tricks were helpful and the NoCable OTA Antenna TV Guide download works again quickly and without any problems.
By the way there may be other problems and errors that you may find in the overview of all NoCable OTA Antenna TV Guideproblems .
If you continue to have problems and NoCable OTA Antenna TV Guide is still loading slowly, we look forward to hearing from you.
NoCable OTA Antenna TV Guide Report a problemSimilar NoCable OTA Antenna TV Guide issues:
- NoCable OTA Antenna TV Guide not loading: Issues with NoCable OTA Antenna TV Guide
Similar messages:
- PS4 Second Screen not loading: Issues with PS4 Second Screen
- D O N Barber Beer not loading: Issues with D O N Barber Beer
- Dahd Teacher not loading: Issues with Dahd Teacher
- Merkur Magie not loading: Issues with Merkur Magie
NoCable OTA Antenna TV Guide won’t load or is slow? Report here:
FAQs
If you're having problems with the TV Guide, it could mean your device isn't receiving the correct signals needed to populate it. This could be due to: Channel availability in your area. Planned works taking place in your area.
Why is the antenna TV channel not working? ›
Your cables may be loose.
If you have loose cables, you'll most likely get no signal or a spotty signal. So make sure your connections are tight at your TV and your antenna. While you're checking your connections, also take a look at your cables to make sure they aren't bent, looped, or otherwise broken.
Why have I suddenly lost TV channels? ›
If you are experiencing picture break up or missing channels, your problem might be a reception problem and not due to interference. Therefore, you may just need to manually re-tune your television, this can often solve a number of common problems.
Is there an app for free antenna TV? ›
NoCable is the ultimate Over-the-Air TV companion app! NoCable makes TV free again with a unique broadcast TV listing and schedule that will help you replace the TV guide you used to have with your old Cable TV or Satellite provider. Cutting the Cord has never been this easy!
What happened to the TV Guide? ›
In 2020, Red Ventures acquired the assets of CNET Media Group, including TV Guide, from ViacomCBS. On October 3, 2022, Red Ventures sold TV Guide and other entertainment websites to Fandom Inc.
Why is my EPG not working? ›
This is common for several reasons, the EPG provider could just be down for maintenance or updates or your connection failed for some reason, but if you have one that continues to fail, it may need to be removed. Many times when an EPG fails, it will stop updating so any EPGs that haven't already updated, won't update.
Why does my TV antenna glitch? ›
The causes mostly come down to the basic idea that the signals reaching the device aren't strong enough. You may be too far from the broadcast location, or something physically blocks the signals. The antenna could be in a less-than-ideal place or facing the wrong direction.
How do I fix my TV antenna problem? ›
Suggested fixes:
- Check cables and fly leads are straight, not too long and in good condition.
- Use a quad-shield coaxial cable (type RG6) to connect your antenna to your TV.
- Check the connection between your wall socket and TV, video recorder or set-top box.
The most common causes of TV picture problems are a faulty connection cable between the TV and the antenna socket, or a damaged mast amplifier or power supply unit. External disturbances are most common when using an older amplifier that also amplifies LTE signals, causing overload.
Why did my antenna stop picking up channels? ›
If hills, trees, buildings, or other geographic features are in between the broadcast towers and the antenna, the signals might not be able to reach your antenna. Elevating the antenna, either by placing it in a higher location or using a taller mast, will increase the signal reception.
If you are not seeing the station, you'll need to go into the tv settings, usually under Channels or Broadcast, and run the channel scan/search option there to retune the tv for the new frequencies. This is a simple process done using the tv remote.
Why does my TV say no signal when everything is plugged in? ›
Overview. A "No Signal", "No Source", or "No Input" message will appear on your TV screen if the TV is not receiving a signal from your TV box. This is often a result of either the TV box being powered off, not being properly connected to the TV, or the TV being set to the wrong input.
What is the best antenna to get free local channels? ›
- ClearStream 2Max | Best TV antenna overall. ClearStream 2Max. ...
- Best Buy Essentials Thin Indoor HDTV Antenna | Best cheap TV antenna. ...
- Channel Master CM5020 | Best outdoor TV antenna. ...
- Mohu Leaf 50 TV Antenna | Best portable TV antenna. ...
- Winegard FlatWave Amped FL5500A | Best indoor antenna.
With Antenna Point, aiming your TV antenna is easy! The map in the app will display transmitting towers along with the distance from your home to each tower. Antenna Point will identify your location and provide the TV antenna coverage area within 35-mile, 50-mile, and a 70-mile range pattern.
Does free TV antenna really work? ›
Antennas might have a range from 35 to 150 miles. Depending on how close you are to TV towers, you may find an abundance of channels, including some Spanish stations. Antennas can receive all the major broadcast stations such as ABC, NBC, CBS, PBS, Fox, The CW and more. On top of that, many networks have subchannels.
Why wont my direct TV guide work? ›
Many issues, including channels missing from the guide, can be fixed by refreshing (reauthorizing) your receiver. To refresh: Go to My equipment & services. Review the equipment you have and identify the impacted receiver(s).
How do I get TV Guide on my TV? ›
Finding the TV Guide
Press Guide on your remote. This button is usually labelled as Guide, EPG (Electronic Program Guide), or will show as a box with two horizontal lines inside. You can also get to the TV Guide from the home screen via the menu options at the top of the screen.
Why does my TV guide say no data? ›
When your Guide shows “No Data”, it means that the guide information is still loading. This is a normal behaviour when: You just activated your set-top box. You just plugged your set-top box back.
